User Manual

Attention!
6 Maintenance
........................................................................................................................
21
7 Trouble Shooting
................................................................................................................
22
1 General Information / Introduction
1.1 Notes about Operating Instructions
 The copyright to these technical documents is the property of DECO, Manufacturers of
Laboratory Grinding Equipments.
 These operating instructions are not to be reprinted or copied without the express
approval of DECO.
 Please study these instructions carefully before operation.
 All operators must be familiar with the contents of the operating
instructions.
 Please observe all notes concerning your safety.
 The mill was designed with the user's safety in mind; however
inherent risks cannot be excluded. Follow the advices in these
instructions to avoid risks to users.
 The symbols in the right hand margin highlight the risks described in the text. Symbols
are also to be found on the instrument warning users of possible risks. Warning symbols
are surrounded by a triangle.
 These operating instructions do not constitute a complete technical description. They
describe only the details required for safe operation and maintenance for usage under
normal conditions.
1.2 Explanations of the signs at the instrument and in the operating instructions
Attention!
warning against danger spot
observe operating instructions
Attention! mains voltage
Attention! risk of explosion