User Manual

Operation

External Calibration

The weight required for calibration/adjustment isdefined in the factory settings(see“Specifications”).

Step Key (or instruction) Display/Data output

1. Zero the balance ［TARE］ . g

2. Start calibration [CAL] PLEASE WAIT

The balance will show

“PLEASE WAIT”,

after stable it will Display the

prompted calibration weight

(In this sample, 200g) + . g

CAL

4. Apply the prompted calibration + . g

CAL

weight

5.Calibrate Weight [CAL] + . g

The balance will show the weighing

value and blink. After stable, the

balance will beep a sound and return

to the normal weighing mode to finish

the calibration

6. Remove the calibration weight. . g