User Manual

Balance Setting

Setting the Parameters (Menu Codes)

Example: Adapting the balance to “very unstable" ambient conditions (menu code: . . ).

Step Key (or instruction) Display/Data output

1. Switch off the balance. ［］

2. Switch the balance on. ［］

3. Tare the balance. ［TARE］ . g

［MENU］> 2 sec .

○Scroll upward within a menu ［MENU］ .

level; after the last menu code, the first repeatedly . . .

code is displayed again. .

3. Select menu level 2(scroll to [F] .

the right).

4. Select menu level 3(scroll to [F] . . o

the right).

5. Menu level 3: ［MENU］repeatedly . .

Scroll until the desired

number is shown.

6. Confirm change; [F] . .

“o” on display indicates

active setting.

○Return to higher menu level [CF] .

Return to higher menu level

○Set other codes as desired. [MENU], [F], [CF]

7. Save changes and Press and hold

［

］

> 2 sec.

exit the menu.

○Exit menu without saving ［］

changes.

>Restart again . g