Installation Manual

Part Number 3080006.001, Rev. D ©2012, HES, Inc. 4
Configure
6
Install the Shaft Extension.
If your cabinet door thickness is greater
than ½”, install the Shaft Extension to the
Antenna/Reader to ensure proper
engagement into the lock. Install the Shaft
Extension to the shaft as shown here and
firmly tighten the screw.
Door Thickness
Extension
Shaft Used?
1/16” – ½”
NO
> ½” – 1 ½”
YES
7
Install the Key Override Paddle.
If a Key Override is used, install
the Key Override Paddle on the
arm of the lock body as shown
here and firmly tighten the
screw.
8
Key Override Door
Preparation.
If a Key Override is used, drill a hole in
the door based on cam length (R).
8a. Measure cam length (R).
8b. Calculate the distance from the lock
features based on the image to the
right.
8c. Drill a hole in the door based on the
cam lock installation instructions.
Shaft Extension
2-56 X 1-¼ screw
(provided)
0-80 X 1/2 screw (provided)
Table 1
Latch centerline
Drill hole in door
based on cam lock
installation
instructions.
=
Key Override
Paddle