User's Guide

16. Install the single-door strike plate.

16a. Place the strike plate over the pilot holes. Insert and tighten two screws in the slotted holes.

16b. Close the door to verify installation. Adjust the strike plate if necessary.

16c. After adjusting, insert and tighten the lock down screw on the strike plate.

OPTIONAL DOUBLE-DOOR INSTALLATION

17. Install the Double-Door Strike Plate Mounting Bracket

Note: The Double-door bracket requires that one door can be secured.

17a. Place the bracket on door, making sure it aligns with the mark made in Step 2c and the edge of the door.

Mark the door.

17b. Remove the bracket and drill pilot holes at the two marks.

17c. Install the bracket using the mounting screws provided.

18. Install the double-door strike plate.

Place the strike plate over the holes on the bracket. Insert and tighten the two 6-32 X 5/16”screws provided.

16a-b

16c

Note: Do not

install lock-down

screw until the

strike plate is

correctly adjusted.

17a

17b & 17c