User's Guide

3080076.002, Rev. X01 Draft ©2013, HES, Inc. 8
8. Install the Shaft Extension.
If your cabinet door thickness is greater than ½”, install the Shaft Extension to the Antenna/Reader to ensure
proper engagement into the lock. Install the Shaft Extension to the shaft as shown here and firmly tighten the
screw.
Door
Thickness
Extension
Shaft Used?
1/16” – ½”
No
> ½” – 1 ½”
Yes
9. Install the Key Override Paddle.
If a Camlock Key Override will be used, install the Key Override Paddle.
9a. Insert the Paddle’s arm into the opening shown and align the rails of the paddle to the ones on the lock.
9b. Gently slide the paddle until it stops.
10. Key Override Door Preparation.
10a. If a Key Override is used, drill a hole for a
3/4” Cam Lock in the door based on the
installation template. Use template.
Shaft Extension
2-56 X 1-¼ screw
(provided)
Table 1
9a
9b
10a