User's Manual

Part Number 3085006.001, Rev. A 2
SYSTEM OVERVIEW
The K200-622 wired cabinet lock (K200) extends access control to a cabinet or drawer. The K200 lock is capable
of reading radio-frequency identification (RFID) credentials and providing that credential data to an electronic
access control (EAC) system via Wiegand data signaling. The EAC is responsible for determining whether user
access should be granted or denied. When the EAC provides an active-high unlock signal to the lock in the access
granted case, the K200 drives a motor to complete the unlock/lock cycle. EAC indication of user access/denial is
provided to the user by way of LED control inputs on each lock. Additional lock monitoring features (e.g., door
position, tamper) are monitored within the lock and status of each is provided to the EAC.
External Interface Signals Summary:
Lock Signal
Name
Lock Signal
Direction and Wire
Color
Electrical Interface Logic
Vin
Input,
Red/24 AWG
Power to Reader Input Power
Unlock
Input,
Orange/24 AWG
Wetted Relay Contact
Closure
(0–35 VDC)
Active High
Tamper / Door
Position +
Output,
Yellow/24 AWG
Dry Contact
(0–35 VDC, <100mA)
Open = Unlocked
Closed = Locked
Tamper / Door
Position –
Output,
Blue/24 AWG
Dry Contact
(0–35 VDC, <100mA)
Open = Unlocked
Closed = Locked
Wiegand Data 0
Output,
Green/24 AWG
0–5 VDC Active Low
Wiegand Data 1
Output,
White/24 AWG
0–5 VDC Active Low
Green LED
Input,
Brown/24 AWG
0–5 VDC Active Low
Red LED
Input,
White/Brown/24 AWG
0–5 VDC Active Low
Ground/Return
Input,
Black/24 AWG
– –

LED Function: LED states are controlled and defined by the User’s EAC. Enabling the red and green LEDs on
the K200 occurs via an active low (ground) signal.
Output Type: SIAAC-01-1996 Wiegand Output Compliant.
FCC Part 15, Compliant, Industry Canada Compliant
BHMA: A156.3, A156.36, A156.25 Compliant
Credentials Supported: 125kHz Proximity or 13.56MHz iCLASS, iCLASS SEOS, iCLASS SE, ISO 15693
ICLASS, ISO 14443A Mifare, Mifare Plus, Desfire SE, Desfire EV1, and NFC over HCE.