User's Manual

ManualsBrandsHanchett Entry Systems ManualsElectronicsAperio Cabinet Lock (K100-622-PA2), Aperio Server Cabinet Lock (KS100-640-PA2), Aperio Reader (R100-PA2)



3080076.004, Rev. C 12

DRAFT

OPTIONAL DOUBLE-DOOR INSTALLATION

13. INSTALL the Double-Door Strike Plate Mounting Bracket

NOTE

: The double-door bracket requires that one door can be secured.

13a. PLACE the bracket on door, making sure it aligns with the mark made in Step 2c and the edge of the door.

13b. MARK the door.

13c. REMOVE the bracket and DRILL pilot holes at the two marks.

13d. INSTALL the bracket using the mounting screws provided.

14. INSTALL the double-door strike plate.

14a. PLACE the strike plate over the holes on the bracket.

14b. INSERT and TIGHTEN the three 6-32 X 5/16”screws

provided.

4. INSTALL the Shaft Extension.

4a. IF the cabinet door thickness is greater than ½” [12.70 mm],

THEN INSTALL the Shaft Extension to the Antenna/Reader to ensure proper engagement into the lock.

4b. INSTALL the Shaft Extension to the shaft as shown

in the figure and firmly TIGHTEN the screw.

Door

Thickness

Extension

Shaft Used?

1/16” [1.59 mm] – ½” [12.70 mm] No

> ½” [12.70 mm] – 1 ½” [38.10 mm] Yes

5. IF a Cam Lock Key Override will be used, AND the orientation allows for

installation, THEN INSTALL the Key Override Paddle.

5a. INSERT the Paddle’s arm into the opening shown, and ALIGN the rails of the paddle to the ones on the

lock.

5b. SLIDE the paddle

gently until it stops.

6. PREPARE the Key Override Door.

NOTE: The Cam Lock is optional and must

be obtained by others.

6a. IF a Key Override is used,

THEN USE template to mark and drill a

hole for a 3/4” [19.05 mm] Cam Lock

in the door.

Shaft Extension

2-56 X 1-¼” [M1.4 x 0.3 x 31.50 mm]

screw (provided)

Table1

13a

13b and 13c



6b. INSTALL the optional Cam Lock with

the cabinet lock as shown in the

ure.