User's Manual



3080076.004, Rev. C 13

DRAFT

7. INSTALL the Antenna/Reader.

***CAUTION***

Pinching the wires may prevent the Reader and

Lock from properly functioning.

7a. PLACE and HOLD the antenna/reader to the outside

of cabinet, routing the wire through the

1/2” [12.70 mm] offset hole, and ENSURE the knob

is in the locked position in the vertical.

NOTE: Using the Table 2 below will help determine the

length of the top mount screw needed, based

on the thickness of the cabinet door.

7b. INSTALL the top mount screw to attach

the antenna/reader to the outside case.

Reader mounting screw.

Table 2