User's Manual
Part Number 3080006.009 Rev. C 7
DRAFT
7. Installing the Handing Selector
NOTE: Be careful not to insert/snap the handle all the way in as the lever will lock.
8. Testing the Lock with the Access Control System
TEST the lock with a known good credential to confirm it will open as desired when installed.
2. POSITION the arrows to
point toward the door edge
as shown above.
1. INSERT handing
selector into lock.
Dooredge
1. PRESENT a credential known
to the access control system.
2. VERIFY a green LED is lit
indicating access is granted;
LIFT lever and TURN to open
the cabinet. REFER to the LED
reference card for any other
3. SECURE cam with screw.