User's Guide

3085006.002 Rev. A 4
1. Installing an SFIC Core
NOTE 1: A key override (SFIC) provides a backup entry method in the rare case the KS200 or EAC
is inactive (Recommended).
NOTE 2: The included SFIC cam has been tested with Medeco and Sargent 6- or 7-pin SFIC cores.
2. Preparing the Cabinet
1. LOCATE the 1” [25 mm] x 6” [150 mm] lock cutout on
the door (some doors may require modification).
2. ENSURE power is available at the rack.
3. RE-USE the existing cam, if possible.
NOTE: Three cams are supplied.
CAM CAM LENGTH CAM DEPTH
CAM 1 1-1/2” [38 mm] 5/8” [16 mm]
CAM 2 1-1/2” [38 mm] 15/16” [24 mm]
CAM 3 1-3/4” [45 mm] 7/8” [22.5 mm]
1. REMOVE plug
from handle
7-pin
6-pin
2. INSERT core into
SFIC cam using
the included
spacers.
3. INSERT SFIC
cam into lock