User's Manual

W07I98M-RTC1

User’s Manual

3.2.2 Regulating the Battery

If the battery is used frequently, recommend you to regulate the

battery every month. And if you have following conditions, please

regulate the battery immediately:

 The battery status is incorrect battery level.

 The battery pack is not use above one month.

 The battery work time have striking change.

Following the step by step to set up Battery Calibration in BIOS.

1. Enter to the Tablet PC BIOS setup, select in “Advanced” option.

2. Enter to the Battery Calibration, press “OK” to go next.

When you Push “OK” to start Battery Calibration, following below

indicated to regulate the battery.

3. Please plug-in an AC adapter to supply power,it will recalibrate

the gauge of battery now.

4. Initialize battery and adjust LCD brightness. It is charging the

battery, the waiting time depend on the battery level between few

second and four hours.

5. While the battery is fully charged, please remove the AC adapter

and LEAVE the Battery RUNNING OUT OF POWER that normally

need to wait for few hours.

6. While the power level running out, you can charge the battery

again. When the battery is fully charged, it’s finished to regulate.

You can turn on the tablet PC to normal use.