User's Manual

W07I98M-RTC1

User’s Manual

3.2.3 Battery Low Signals and Actions

Battery Low occurs when the battery has approximately 10 %

(Windows default setting) of its charge remaining. The tablet PC’s

Battery Charge Indicator ( ) blinks red to alert you take

actions.

NOTICE:

1. You can set up the Battey Low threshold and signals under

Windows. Immediately save your data upon Battery Low. The

remaining operating time depends on how you are using the

tablet PC. If you are using the audio subsystem, PC card, hard or

USB flash disk, the battery might run out of charge very quickly.

2. Always respond to Battery Low by placing your tablet PC on the

Standby or Hibernation mode, turning off the tablet PC, or

connecting the AC adapter.

CAUTION:

1. If you do not take any action, the tablet PC will automatically

hibernate and turn off.

2. If you are using a PC card, do not access the card during battery

low periods. The access may takes longer time than battery to

run out of charge, thus making your access to the card fail.

3. If you fail to save your data when the battery completely runs out

of charge, then you will lose your data.