User's Manual

NAUTIZ X4 Manual
35 handheld
FSCAN
Do Scan
LSCAN
Do Scan
RSCAN
Do Scan
F1
No Action
F2
No Action
F3
No Action
F4
No Action
SPACE
Space
STARTMENU
Start Menu Key
BACK SPACE
Bksp Key
ENTER
Return Key
VOL+
Volume up
VOL-
Volume down
CAMERA
Camera
BACKLIGHT
Backlight
VIBRATOR
Vibrator
LOCK
Lock
6. Using the Image Engine
6.1. Overview
The HANDY TERMINAL contains an N560X 2D image engine that instantly reads all popular 1D and 2D bar codes and
supports omni-directional aiming and decoding or a N4313 1D laser engine that reads all popular 1D bar codes. The
image engine can also capture digital images, such as signatures and pictures.
☞NOTE: It may not read the barcode due to specular reflection if scanning from directly above. Try again after changing angle.
☞NOTE: It may not read the barcode, if this handy terminal is too close to or too far from the barcode even if the barcode is within the aiming range.
Move the handy terminal toward or away from the barcode slowly and try again. The aiming range is for reference only.
☞NOTE: It may not read the barcode if the barcode surface is curved. Scan the barcode at the center of the aiming range.
☞NOTE: It may not read the barcode if the barcode surface is dirty. Try again after cleaning the barcode.
☞NOTE: It may not read the barcode if the image engine window is dirty. Try again after wiping the window with a cotton swab or similar soft object
gently.
☞NOTE: It may not read the barcode according to the direct sunlight or the brightness of the surrounding. Try again away from the direct sunlight.
Try again after adjusting the brightness of the surrounding if indoors.