User's Manual

NAUTIZ X4 Manual
42 handheld
5. When the bar code is successfully decoded, the decode LED lights green and the terminal beeps.
7.8. Sample Bar Code
You can use the following bar code to verify decoding:
7.9. Scanning Positions
The aiming beam must be aimed across the entire bar code to provide you with the best scanning performance. The aiming
pattern is smaller when the terminal is held closer to the code and larger when the terminal is held farther from the code.
Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas larger bars or elements (mil
size) should be read farther from the unit.
8. Using ScanWedge
8.1. Overview
ScanWedge sends data from the installed scan engine(N4313 or N560X) to the foreground application as keystrokes or
clipboard. The foreground application is the open software application whose window is currently active on the display.
As a result, you can check decoded bar code data with Microsoft WordPad.
8.2. Enabling ScanWedge
ScanWedge is enabled by default in Handy Terminal
Tap the ScanWedge icon once . ScanWedge initializes and enables.
Command Bar Menu
Tap icon in taskbar to open the command bar menu.