User's Manual

NAUTIZ X4 Manual
26 handheld
Pin Description Direction
DC IN +5V IN
DC IN +5V IN
NC
GND
USB Host +5V Enable OUT
USB Host D+ IN/OUT
USB Host D- IN/OUT
USB Host Detect IN
GND
NC
GND
GND
CRADLE Detect IN
USB Client D+ IN/OUT
USB Client D- IN/OUT
USB Client +5V IN
☞NOTE: Signals referenced are for a DTE device.
USB Port
This connector supports High speed USB 2.0 communication (up to 480 Mbps)
Also external power from the MicroUSB Adaptor that is included with the terminal. When connected to the Handy
Terminal MicroUSB Adaptor, the terminal is powered and the main battery pack is charging.
4.14.
Peripherals and Accessories
The following items are sold separately and enhance your HANDY TERMINAL’s capabilities.
Single Slot Cradle
This charging and communication cradle supports USB, enabling your terminal to interface with the majority of enterprise
systems. When a terminal is seated in a powered base, its battery pack charges in five hours for the standard capacity
4000mAh pack.
For more information, see Single Slot cradle/Single Ethernet cradle Device on paragraph 12.
Single Ethernet Cradle
The Single Ethernet cradle is used to charge the battery, to power the battery charging system in the terminal, and can be
used to communicate data from the terminal to a PC/laptop via the Ethernet port.
For more information, see Single Slot cradle/Single Ethernet cradle Device on paragraph 12.
4.15.
USB ActiveSync Cable