User's Manual

NAUTIZ X4 Manual

28 handheld

Charging Options

When the battery is installed in the terminal, you can use any of the peripherals listed below to charge the battery.

• AC Power Supply to USB Port direct.

• Single slot docking cradle/Single slot Ethernet cradle

• Insert the battery in the spare battery charging well in the back of either the Handy Terminal slot cradle or Handy

Terminal Ethernet cradle.

Charging Time

The standard capacity 4000mAh Li-ion battery pack requires five hours to charge to full capacity.

4.19.

Managing Main Battery Power

Data and files saved on the Handy Terminal may be stored in RAM memory; therefore, maintain a continuous power supply

to the terminal to help prevent data loss. When you remove a battery pack, insert another charged battery pack in the

Handy Terminal. If the main battery pack is low, insert the terminal into a charging peripheral to power the terminal and

begin recharging the battery.

☞NOTE:

If the main battery is low and the terminal is in Suspend Mode, pressing the

Power

button does

not

wake the HANDY TERMINAL; you

must replace the discharged battery with a fully charged battery or apply AC power to the terminal.

Checking Battery Power

Tap the battery icon to open the Power Properties. The Battery tab opens displaying the charge status of the main battery

Main battery pack