User's Manual

6
8
10. When connected, a list of appropriate and supporting services will appear.
11. Choose the service you want and tap OK. If you don’t select the service, it will not be
synchronized even if the device is synchronized. If you don’t choose a service, a message that
keeps asking you to enter a password will appear.
12. The device will appear in the list of the main panel. When the both devices accept their
passwords, a reliable (synchronized) partnership is established.
Available Services
Note: Some devices may not require PIN depending on the certification of devices.
For the information on available services, refer to the next paragraph.
Hands-free Services
How to connect a Bluetooth headset
Note: The partnership with a Bluetooth headset is different from each headset, and the device
only remembers the last connected headset. If a problem occurs while making a connection to
a headset, switch the headset to detection mode. For more details, refer to user’s manual of the
headset. Only WAN audio will be transmitted to a headset. System audio will keep being
transmitted to NAUTIZ X3 speaker. You can answer or make a call using a hands-free profile.
1. Activate Bluetooth in both devices and turn on detection mode.
2. Check the distance between the devices is within 10 m (30 ft).
3. Tap Start > Settings > Connections > Bluetooth icon.
4. Tap New Device. NAUTIZ X3 will begin to search for a Bluetooth device within the range.
5. Enter the name of the headset, and tap Next. A password window will appear.
6. Enter a password for the headset.
7. Tap Next. NAUTIZ X3 will be connected to the headset. For the instructions on the
communications with Bluetooth devices, refer to the user’s manual of the headset.
Note: While an active pairing is established, NAUTIZ X3 will not be switched into pause mode
even after pressing the power button. Instead, a notification message will appear. The power
button will be back in action after WAN communication is disconnected (in case of using
hands-free profile).
Serial Port Services
Wireless Bluetooth uses serial port connection as well as the wired serial cable connection. It
configures applications that will be used for connections to correct serial ports.
How to connect to serial ports
1. Activate Bluetooth on both devices and turn on detection mode.
2. Check the distance between two devices is within 10 m (30 ft).
3. Go to Start > Settings > Connections > Bluetooth > Device tab.