Quick Manual

Quick Manual
Mobile RFID Device Page 3 of 9
1 Features and Structure
2 Basic Operation
2.1 Wake up
System would enter standby mode automatically after the default 1 minute idle status, or we can press the power button
to enter the standby mode forcedly; For tablets in standby mode, please the power button slightly to wake it up;
2.2 Shutdown
Press the power button for seconds and select the option of “Power off” to shutdown the terminal. Please save the data
before shutting down the system, otherwise the unsaved data would be lost.
2.3 Software Installation and Data Transfer with a PC
Plug in the USB connection and select the model of USB storage mode. You can also try to pull this information from the
top of the screen. Double touch on this information; this will open the USB computer connection settings.
Only MTP and PTP provide read/write access from your PC to the device. The device will appear in Windows Explorer as
portable device labelled “full_rlk6735m_65c_1_I1”.
 MTP allows access to a number of folders.
 PTP allows access only to the folders “DCIM” and “Pictures”.
DC/USB Port
Power Button
Right Button
Volume Button
Left Button
Barcode Scan Window
Camera
RFID Sensor Zone
Battery Locker
Battery Cover
Barcode Scan Window