User's Manual

1. It is forbidden to disassemble the battery cells under any circumstances.
2. It is forbidden to immerse the battery in liquid to prevent moisture.
3. It is forbidden to charge, use or place the battery near heat sources, such as fire, heater, etc., or under high
temperature (such as strong sunlight or very hot cars), otherwise it will cause overheating and fire or shorten the
life. It is forbidden to directly solder the battery.
4. It is forbidden to heat or throw the battery into a fire, or put the battery in a microwave oven or high-pressure
container.
5. If the battery leaks or smells (electrolyte), please discard the battery immediately. If the electrolyte leaks and
touches the skin, eyes or other parts of the body, immediately rinse the electrolyte with clean water and seek
medical attention.
6. It is forbidden to hit or pierce the battery with sharp parts, such as nails and other sharp objects.
7. It is forbidden to transport or store the battery and metal objects, such as necklaces, hairpins, etc.
8. It is forbidden to hit, step on, or throw the battery with a hammer.
9. The battery is a consumable product, and its capacity will gradually decrease as the use cycle increases. It is
recommended that the battery be replaced in time when there is a problem.
Battery Installation and Device Directly Charging Instructions
1. Battery installation:
When installing the battery, please pay attention to the battery installation direction. Put the front of the battery
into the battery slot of the device first, and then push the bottom of the battery to enter the device. Do not use
brute force to squeeze the battery and the device. The installed battery compartment is flat and firm. .
2. Instructions for using direct charging:
Insert the Type-c data cable into the data port at the bottom of the machine to charge the device. The charging
indicator on the device is red when it is charging, and the red light is off when it is fully charged.
Instructions of Charging Cradle
The charging base can charge the device and the spare battery at the same time. When charging the device,
insert the device into the host card slot of the charging base directly and hear a slight click sound. When charging
the battery separately, lay the battery flat and insert it into the battery card slot of the charging base. Then use
the power adapter to power the charging station.
Optional Function Instructions
1. QR code