User Manual

Version1.0 

FIGURE5.20.PAIREDDEVICELIST
ConfigurableBluetoothPowerClass
TheBluetoothinterfaceontheAlgizRT10maybeconfiguredtorunattwopowerlevels:
 Class2operation.Thisisthedefault,andprovidesashortrangeofoperation
 Class1operation.Thisisahighpowermode,providingalongerrangeofoperation
NOTE:Tomakeeffectiveuseofthehigherpower,bothdevicesmustoperateinClass1.
FIGURE5.22.SELECTBLUETOOTHPOWERFROMBLUETOOTHSETTING
Tochangethepowerclass,selectthe"BluetoothPower"menuoptionfromBluetoothconfiguration,
asshowninFIGURE5.22.SELECTBLUETOOTHPOWERFROMBLUETOOTHSETTING.Thisoptionis
availablewhenBluetoothisoff;itisdisabledwhenBluetoothison.Theusercanselecttherequired
powerclassasshown
inFIGURE5.23.SELECTPOWERCLASS.
 