User Guide
Programming the Scanner
3-17
Symbology Programming
♦ Code 2 of 5 Family & German Post Code Setting ♦
PROGRAM END(Exit)
Family Code Selection Parameter Selection Option Code
Code 2 of 5 Settings
Select any Code 2 of 5
Select Standard/Industrial 2 of 5 only
Select Matrix 2 of 5 only
Select Interleaved 2 of 5 only
Select Interleaved 2 of 5 S Code only
Select IATA only
Select China Postal Code only
Disable check digit verification
Enable check digit verification
Disable check digit transmission
Enable check digit transmission
0
1
2
3
4
5
6
7
8
9
A
Code 2 of 5 Min. Length
Default (06)
Minimum length
Scan 2 digits from the option code chart in the Appendix.
(2 digits)
Code 2 of 5 Max. Length
Default (99)
Maximum length
Scan 2 digits from the option code chart in the Appendix.
(2 digits)
German Postal Setting
Disable
Enable
0
1
FACTORY DEFAULT
The scanner can decode almost all Code 2 of 5 symbologies automatically. However, since the Code 2 of 5 encoding algorithm is not very robust, we recommend
that you select
only one
kind of Code 2 of 5 for reading, or set limited
maximum and minimum reading lengths
for reading.