User Guide

4 - 6 4600g, 4600r, 4800i User’s Guide
User Specified Intercharacter Delay
An intercharacter delay of up to 495 milliseconds (in 5 ms steps) may be placed
after the transmission of a particular character of scanned data. Scan the
Delay
Length
bar code below, then scan the number of 5 millisecond steps (0-99), and
the Save bar code using the Programming Chart inside the back cover of this
manual.
Next, scan the
Character to Trigger Delay bar code, then the 2-digit hex value
for the ASCII character that will trigger the delay ASCII Conversion Chart (Code
Page 1252), page A-4.
To remove this delay, scan the
Delay Length bar code, and set the number of
steps to 0. Scan the
Save bar code using the Programming Chart inside the back
cover of this manual.
Interfunction Delay
An interfunction delay of up to 495 milliseconds (in 5 ms steps) may be placed
between the transmission of each segment of the message string. Scan the
Interfunction Delay bar code below, then scan the number of 5 millisecond
steps (0-99), and the
Save bar code using the Programming Chart inside the
back cover of this manual.
To remove this delay, scan the
Interfunction Delay bar code, then set the
number of steps to 0. Scan the Save bar code using the Programming Chart
inside the back cover of this manual.
Delay Length
Character to Trigger Delay
Interfunction Delays
Prefix Scanned Data Suffix
1 2345STX HT CR LF
Interfunction Delay