User's Manual

33
3.2.3 Cleaning
Cleaning the exterior
Use only detergents or cleaners dedicated for computers.
Screen
Use only detergents or cleaners dedicated for computers. Take care not to allow any excess liquid to enter the gaps around the screen.
To avoid scratches, wipe using a non-abrasive dry cloth.
Scanner Window
Clean regularly using a lens cleaner.Clean regularly using a lens cleaner.
Connectors
Cradle
1. Remove the battery
2. Soak the end of a swab with isopropyl alcohol and rub across the connector pins.
3. Be careful as to not leave any residue on the connectors.
4. This process should be repeated approximately three times.
Note: If isopropyl alcohol is not available, use computer cleaning detergent or a pencil eraser (rubber) taking care not to leave any
foreign bodies at the pins.
1. Remove the power cable from the cradle.
2. Soak the end of a swab with isopropyl alcohol and rub across the connector pins.
3. Be careful as to not leave any residue on the connectors.
4. Rub the connectors carefully ensuring that both sides of the connectors are fully cleaned; repeat three times.
5. Remove any foreign bodies inside the cradle using compressed air or similar.
6. Clean the exterior using computer cleaning detergents.
Contamination levels may vary depending on the users' operational environment; it is recommended that the device be cleaned
regularly.
ALGIZ 7 Manual - Chapter 3