Operation Manual

15
M3 Mobile Manual - Chapter 2 - Basic Usage
Calibration
Calibrate the touch screens shown below, at fi rst time use or when cold (hard) booted.
Tap the screen one time with a Stylus
pen
Tap the (+) mark with the Stylus pen
as it moves around.
You can see the screen how to use the
Stylus. If you don’t need it, click the Skip.
1. Press and hold the Stylus pen on the screen
then select the Cut on the pop-up menu.
2. Press and hold the Stylus pen like the arrow on
screen, Tap the Paste on the pop-upmenu.
3. When all processes are complete, click the Next.