Operation Manual

63
To use the GPS
To set the GPS.
- Tap the ‘Start > Settings > System Tab > GPS’and then you can set the information related to
the GPS.
- You don’t have to set additional information when there is a single program which uses GPS
data. When there are more than one program which use GPS data, you need to set the program
port and hardware port required for each program.
Select the GPS on the System Tab.
Set the GPS Program Port which is not yet used.
Set the Hardware port of the device.
GPS hardware port for the M3 Mobile is
COM2 and with baud rate of 9600.
Attention:
* GPS is optional. GPS feature is not available on the unit
with no GPS module integrated.
M3 Mobile Manual - Chapter 6 - Usage of Device