Installation Guide

Handi-Tread Concrete Stair Installation
1. Once you have acquired all of the necessary materials, align the tread in the desired
position. If you are installing a nosing, make sure that it fits snugly at the edge of the
stair. If you are installing a tread, set it back roughly ½” from the edge. Using a marker
and the tread as a template, place a dot in each of the screw holes to mark the
placement of the screws on the concrete surface.
Note that the screw holes are not raised, DO NOT use the raised traction bumps for
your screw placement.
non-slip treads non-slip nosing