Installation Guide

Handi-Tread Concrete Stair Installation
1. Once you have acquired all of the necessary materials, align the tread in the desired position.
If you are installing a nosing, make sure that it fits snugly at the edge of the stair. If you are
installing a tread, set it back roughly ½” from the edge. Using a marker and the tread as a
template, place a dot in each of the pin holes to mark the placement of the drive pins on the
concrete surface.
Note that the pin holes are not
raised, DO NOT use the raised traction bumps for your pin
placement.
non-slip treads non-slip nosing