Product Manual

Sit to Stand Slings

Description

A standing sling is to be used in conjunction with a standing lift. Clients must be assessed for appropriateness of

use. This sling is designed to provide support to a client using a sit to stand lift. Make sure to refer to the product

information specific to the sit to stand lift or stand aid to make sure it is set up properly for your client’s specific

use. The knee blocks should be placed at an appropriate height.

Clinical Application:

Appropriate for a client who:

 have some ability to weight bear – at least 10-20%

 have control and head control

 have a rehabilitation goal connecting to standing and walking activities

May Not be appropriate for a client who:

 have zero weight bearing ability ie. No gluteal or quadriceps strength

 have limited or no trunk or next control

Sling Sizing Guidelines

The sit to stand slings is available in the following sizes:

 X-small

 Small

PAGE 1
Sit to Stand Slings Description A standing sling is to be used in conjunction with a standing lift. Clients must be assessed for appropriateness of use. This sling is designed to provide support to a client using a sit to stand lift. Make sure to refer to the product information specific to the sit to stand lift or stand aid to make sure it is set up properly for your client’s specific use. The knee blocks should be placed at an appropriate height.
PAGE 2
 Medium  Large  X-Large  XX-large Application 1. 2. 3. 4. 5. This is a 2-Part system. With the individual seated in their chair, ask the client to lean forward (this may require some assistance). The Bottom edge of the sling should be placed at waist level (top of pant line). Wrap the chest portion around the individual from back to front. Overlapping the ends of the belt, fasten the buckle portion of the sling and tighten to be comfortably firm.