Product Manual

C450/ C625 - User Guide Rev: 18NOV2011 Page: 18
LCD Display Functionality
Default Display Modes:
The lift unit can be set to either of the following as the ‗Default‘ display mode:
1. Battery Level (the factory setting for the Default Display Mode); or,
2. Number of Lifts.
To change from one operating mode to another please call your local service technician.
In Battery Level Mode the lift will:
1. Display the word, ―Battery‖, with the percentage charged (in 10% increments) in the top
row of the display (e.g., ―Battery Level 60%‖).
2. Display a ―Bar Graph‖ of the battery level in the second row of the display by displaying
the appropriate number of fully blackened rectangles as in the following diagram:
Note: As the lift is initially switched on, the level of battery charge displayed may be
incorrect. However, as soon as the lift is actually operated, the charge level will up date
to the correct level.
In Number of Lifts Mode the lift will:
3. Display the word, ―Lifts‖, with the number of lifts completed in the top row of the display
(e.g., ―Lifts 500‖) and a bar graph to indicate the battery level as in Battery Level Mode:
In any ‗Default display mode‘, if the battery levels fall below 25%, the lift will go into Low Battery
Mode. The lift will then:
4. Make an audible beeping sound every ten (10) seconds.
5. Flash ―Low Battery‖ in the first line.
6. The bars indicating charge level will flash on and off.
%B a t e r y 05t
L i f s ,t x x x xx