Product Manual

C450/ C625 - User Guide Rev: 18NOV2011 Page: 11
If your motorized, traversing lift has a return-to-charge
feature (RTC), pressing & holding the blue and yellow col-
ored directional hand control buttons simultaneously for 3-5
seconds (to produce beeping noise) will automatically re-
tract the lift‘s carry bar and drive the lift along its track until
it docks at the charger.
Note that the RTC feature has several characteristics that
may be altered to the user‘s preference:
RTC Max. Time may be set anywhere from 60 sec to 240
sec in 60 sec increments and represents the maximum time
allowed for the lift to travel to and dock at the charger be-
fore aborting the operation.
RTC Drop Time may be set anywhere from 9 sec to 24 sec
in 3 sec increments and represents the time the lift devotes
to lowering the carrybar upon docking at the charger.
RTC Speed may be set to 2, 4, or 8 and represents the rela-
tive speed the lift travels at to reach the charger.
Contact your Service Technician to change these settings.
Return To Charge (If Equipped)