User's Manual

AP-500 Wireless Outdoor
AP
Page 21 of 47
2.4 Basic Configuration
2.4.1 System Setting
This page can be access by clicking “System -> Setting” from left side menu.
Figure 12 System Setting Page
1) IP Address / Subnet Mask / Gateway
Note that each AP/Bridge unit in the same network must be assigned an unique IP
address. So, you may need to have a network plan before deployment. Enter the IP
address, Subnet Mask and Gateway Address according to the planning.
If there is no
gateway in the network, you may leave it in blank.
IP Address / Subnet Mask / Gateway
change will be immediately applied right after clicking “Save” button.
2) Password
Change Password by typing new password, and confirm new password, and clicking
“Save” button. User will be asked to login again use new password after reboot. Note:
the password is case sensitive