User's Manual

AP-500 Wireless Outdoor
AP
Page 28 of 47
3. Configure 5GHz Bridge
3.1 Bridge Configuration
This page can be access by clicking “Bridge -> Setting” from left side menu
Figure 16 5GHz Radio Basic Setting Page
1) Enable / Disable 5GHz Radio
Click the radio box to enable/disable 5GHz Radio. It is enabled by default.
2) Wireless Mode
There is three wireless modes provide 54Mbps (802.11a), and 150Mbps (802.11a/n HT-20),
and 300Mbps (802.11a/n HT-40+, 802.11a/n HT-40-). It is required to set up the same
wireless mode between the bridge links to communicate each other.
3) Radio channel
Select a radio channel according to the availability or system plan. It is required for
Bridges having the same radio frequency to communicate each other.