User's Manual

AP-500 Wireless Outdoor
AP
Page 34 of 47
4.1 Bridge Security Setting - WEP
This page can be access by clicking “Bridge -> Setting” page.
Figure 19 Bridge Security-WEP Page
1) Security Mode
select “WEP” to enable the security mode.
2) Encryption Key
The WEP key is an ASCII string, can be in one of the following formats: 5 characters, 13
characters, or 16 characters.
Note that it is required to have the same security setting between Bridges to
communicate.
3) Click “Save” and then “Reboot” button when you finish setting up for parameter changes