User's Manual

AP-500 Wireless Outdoor
AP
Page 36 of 47
4.2 Bridge Security Setting – WPA
This page can be access by clicking “Bridge -> Setting” page.
Figure 20 Bridge Security-WPA Page
1) Security Mode
Select “WPA” to enable the security mode.
2) WPA Mode
Select WPA Mode according to the security plan.
3) Cypher Mode
Select Cypher Mode according to the security plan. TKIP or AES
4) PSK
The key is an ASCII string with length from 8 to 63 characters.
5) Click “Save” and then “Reboot” button when you finish setting up for parameter changes
taking effect.