User's Manual

AP-500 Wireless Outdoor

Page 38 of 47

5. Configure 2.4GHz Access Point (AP)

5.1 AP Configuration

This page can be access by clicking “AP -> Setting” from left side menu

Figure 21 2.4GHz Radio Basic Setting Page

1) Enable / Disable 5GHz Radio

Click the radio box to enable/disable 2.4GHz Radio. It is enabled by default.

2) Wireless Mode

There is three wireless modes provide: 54Mbps (802.11g), and 150Mbps (802.11g/n

HT-20), and 300Mbps (802.11g/n HT-40+, and 802.11g/n HT-40-). It is required to set up

the same wireless mode between the AP links to communicate each other.

3) Radio channel

Select a radio channel according to the availability or system plan. It is required for AP

having the same radio frequency to communicate each other.

4) SSID

SSID is used to broadcast the AP service, the client can associate the AP by the specific