User's Manual

AP-500 Wireless Outdoor
AP
Page 42 of 47
6.1 AP Security Setting - WEP
This page can be access by clicking “AP -> Setting” page.
Figure 23 AP Security-WEP Page
1) Security Mode
select “WEP” to enable the security mode.
2) Encryption Key
There are up to 4 keys can be specified. Administrator needs to assign an active key for
encryption. The supported WEP key length can be WEP-64, WEP-128, or WEP-152. The
WEP key can be an ASCII string of 5, 13, or 16 characters; or HEX digit string (0-9 or A-F)
of 10, 26, 32 digits. System determines the key format according to the input key length.
3) Click “Save” and then “Reboot” button when you finish setting up for parameter changes
taking effect.