User's Manual

In Wall Access Point

2-2 Getting Start

WAP-001 support web-based configuration. Upon the completion of hardware installation, can be

configured through PC/NB by web browser such as Internet Explorer, Firefox, and Opera.

¾ Default IP Address:10.59.1.254

¾ Default Subnet Mask:255.255.255.0

¾ Default Username and Password: admin/admin

Note

：

Set the IP segment of the administrator’s computer to be in the same range as WAP-001 for

accessing the system. Do not duplicate the IP address used here with IP address of WAP-001 or

any other device within the network

Step1：Click StartÆSettingÆControl Panel, and then “Control Panel” window appears, Click on

“Network connection” window appears.

Step2：In “Local Area Connection properties” window, select “Internet Protocol (TCP/IPv4)” and

click on “properties” button.