User's Manual

In Wall Access Point
15
3 Configuring the In Wall Access Point
Step 1: Start your browser, and then enter the factory default IP address 10.59.1.254 in your browser’s
location box. Press Enter.
Figure 4 Web Browser Location Field (Factory Default)
Step 2: The In Wall Box Access Pointconfiguration tools menu will appear. In the Username and
Password field, type the factory default user name admin and password admin and click
Login. If you are first time setting the system, the wizard setup screen will appear. You will be
guided, step-by-step, through a basic setup procedure.
Figure 5 Configuration Tools Menu
Note:
) This Web agent is best viewed with IE 5.0 or Netscape 6.0 and above browsers.
) Username and Password can consist of up to 20 alphanumeric characters and are case sensitive.
) If for some reason your password is lost or you cannot gain access to the In Wall Box Access
PointConfiguration Program, please press the reset button to load the device to manufacturer
defaults.
) If the In Wall Box Access Pointdoesn’t send packet in 5 minutes (default), the In Wall Box Access
Pointwills logout automatically.
) Proxy needs to set disable first when administrator accesses admin UI
Username: admin
Password: admin