User's Manual

In Wall Access Point
24
Item Default Description
WEP Key 1
This selects which of the Keys the In Wall Box Access Pointuses
when it transmits. You can change the selected encryption key
every now and then to increase the security of your network.
Note: You have to configure all WEP keys (1~4), and select one
of the four WEP key.
Enter 5 characters (case sensitive) for ASCII 64-bit WEP Key.
Enter 10 characters (case sensitive) for Hex 64-bit WEP Key.
Enter 13 characters (case sensitive) for ASCII 128-bit WEP Key.
Enter 26 characters (case sensitive) for Hex 128-bit WEP Key.
Click Apply button to save the new settings.
Figure 13 Restart Dialog Box
Click Apply button, the restart dialog box appears. Click on Apply to restart the system.