User's Manual

In Wall Access Point
32
3-3-4 SNMP
The SNMP Agent Configuration screen enables you to access to your device via Simple Network
Management Protocol. If you are not familiar with SNMP, please consult your Network Administrator or
consult SNMP reference material. You must first enable SNMP on the SNMP Agent Configuration
screen.
Figure 19 SNMP Setting Screen
Item Default Description
SNMP Disable Disables or enables the SNMP management.
SNMP Port
161 If the SNMP enables, also allowed to specific the SNMP port number
via NAT. The allowed SNMP port numbers are 161 (default),
16100-16199 and Trap port numbers are 162 (default), 16200-16299.
This Port setting is useful for remote control via NAT network.
Trap Port 162
Configuration
Community
Name
public/private
Every unit with SNMP enable must be configured to recognize one or
more community names up to 20 characters. The default setting for
the community of entry 1 is “public” and for the entry 2 is “private” and
others are empty.
NMS
Address
ANY
The address of the NMS. The default settings for the NMS Networking
are “ANY”.
Privileges Read/Write Choose “Read”, “Write”, “Trap Recipients” and “All” for different
privileges. The default setting of the entry 2 is “write” and others are
“read”.
Status Valid/Invalid Chosen “Valid” or “Invalid”. The default setting of entry 1, 2 are valid