User's Manual

WG‐500PHotspotinaPrinter
24

PPTPClient(Point‐to‐PointTunnelingProtocol)
IfPPTPSettingisselected,thenthisscreenwillappear.PleaseentertheIPaddress,
UsernameandPasswordprovidedbyyourISP.

Figure3‐1‐9InternetConnectionSettingScreen—PPPoESetting
Item Default Description
Username Empty Enter the user name provided by your ISP. The user name can consist of up
to 80 alphanumeric characters and is case sensitive.
Password Empty Enter the user password provided by your ISP. The password can consist of
up to 80 alphanumeric characters and is case sensitive.
PPP MTU Setting 1492 MTU (Maximum Transfer Unit) specifies maximum transmission unit size.
TCP MSS Setting 1452 MSS (Maximum Segment Size) specifies maximum segment size.
Service Name Empty Enter the service name provided by your ISP. The service name can consist
of up to 64 alphanumeric characters and is case sensitive.
Connect on Demand and Max Idle Time
Connect on Demand Enable You can configure your WG-500P to cut your connection with your ISP after
a specified period of time (Max Idle
Time). If you have been disconnected due to inactivity, Connect on Demand
Max Idle Time 10
Minutes