User's Manual

WG‐500PHotspotinaPrinter
56

3‐2‐3‐4  SNMP
The SNMP Agent Configuration screen enables you to access to your device via
Simple Network Management Protocol. If you are not familiar with SNMP, please
consult your Network Administrator or consult SNMPreference material.You must
firstenableSNMPontheSNMPAgentConfigurationscreen.

Figure3‐2‐25SNMPSettingScreen
Item Default Description
SNMP Disable Disables or enables the SNMP management.
SNMP Port 161 If the SNMP enables, also allowed to specific the SNMP port number via
NAT. The allowed SNMP port numbers are 161(default), 16100-16199 and
Trap port numbers are 162 (default), 16200-16299. This Port setting is
useful for remote control via NAT network.
Trap Port 162
Configuration
Community Name public/private Every unit with SNMP enable must be configured to recognize one or more
community names up to 20 characters. The default setting for the
community of entry 1 is “public” and for the entry 2 is “private” and others
are empty.
NMS Address ANY The address of the NMS. The default settings for the NMS Networking are
“ANY”.
Privileges Read/Write Choose “Read”, “Write”, “Trap Recipients” and “All” for different privileges.
The default setting of the entry 2 is “write” and others are “read”.
Status Valid/Invalid Chosen “Valid” or “Invalid”. The default setting of entry 1, 2 are valid and
others are invalid.