Use and Care Manual

65
Solar Shed
Inside of building
Installation of Optional Large
Square Window (not included)
17 A. Arrange and attach part RI as shown.
(from Large Square Window kit). Secure to
frame using four
3” (6.7cm) nails.
I.D. Description Size CM Qty.
---- Window 1
RI Sill Plates 2 x 4 x 22-1/2” 57.1cm 2
DV Vertical Trim 1 x 3 x 30-1/4” 76.9cm 2
DT Horizontal Trim 1 x 3 x 28-3/4” 73.1cm 2
---- 3” Nails, 2” Nails, 1-1/2” Finish Nails
30"
RI
3" Nails
17A
17 B. Drill 4 pilot holes in four corners of
window opening. Window cutout
size will be 22-1/2” wide by 30” tall.
Cut window opening.
Four holes
Drilled from
Inside
17B
17 C. Level Window in opening and
secure with four 2
” (5cm) nails.
17 D. Attach Window Trim DV and DT as
shown, using 1
1
/2” (5cm) finish nails.
Note: Top DV is not used for Solar
Shed. Use the HN from main kit.
DV
DV
DT
HN
1-1/2"
Finish Nails
HN
2" Nails
17C
17D
17
Determine location for optional window. Locating window opening is
easiest when done from inside the building.