Warranty

GABLE 10' x 8'
GABLE 10' x 12' GABLE 10' x 16'
22-1/4"
(56,5 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
22-1/4"
(56,5 cm)
24"
(61 cm)
45
RAFTER INSTALL 10' x 12'
3" (7,6 cm)
Locate rafters directly over studs and  ush to overhang in wall frame
(Fig. A).Check that you have the measurements shown. Screw through sof t
panel into rafters using one 2" screw (Fig. A).
Repeat steps to attach (5) rafters.
Attach with two 3" screws at each end (Fig. B). Re-tighten 2" screws if neccessary.
You have attached your rafters. Go to page 48.
Flush
BEGIN
¸
1
PARTS REQUIRED:
pre-assembled
x5
x20
x10
Screw into top
plate.
2" (5 cm)
2" (5 cm)
Screw
Fig.A
1" (2,5 cm)
Fig. B
DOOR
NOTE: Measurements from inside of panels
FINISH
4
3
2
Maintain the measurements between rafters.
Align over studs.