Warranty

GABLE 10' x 8'
GABLE 10' x 12' GABLE 10' x 16'
53
ROOF PANELS 10' x 12'
Keep spacing between the center of the rafters
at the lower edge of the panel and secure with
one 2" nail into each rafter (Fig. E).
Move to the top of the panel
and keep spacing between
the center of the rafters.
Secure with one 2" nail into
each rafter (Fig. E).
Nail the roof panel using 2"
nails 6" apart on edges and
12" apart inside panel (Fig. F).
Attach 47-7/8" x 48" roof panel
 ush to the peak. (Fig.G) and
with a 1/8" (0,3 cm) measurement
at the gable trim (Fig. H).
Attach lower 19" x 48" roof panel
 ush to the top panel and with a 1/8"
(0,3 cm) measurement at the gable
trim (Fig. I).
Attach next lower 19"x96" roof panel
 ush to top panel
Nail the roof panels using 2" nails 6"
apart on edges and 12" apart inside
panel.
Repeat process to attach roof
panels on the opposite side.
Go to page 56.
4
3
12"
(30,5 cm)
48"
(122 cm)
6" (15 cm)
Fig. F
19"
(48 cm)
96"
(244 cm)
48"
(122 cm)
1/8"
(0,3 cm)
Gable Trim
Flush
Fig. I
PARTS REQUIRED:
2" (5 cm)
x152
22-1/4"
(56,5 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
Fig. E
NOTE: Measurements from inside of panel
2" Nail
7/16 x 19 x 96"
(1,1 x 48 x 244 cm)
x2
DOOR
x2
x2
19" x 48" (48 x 122 cm)
47-7/8" x 48" (121,6 x 122 cm)
DOOR
1/8"
(0,3 cm)
Fig. H
Fig. G
Flush at peak.