Instructions / Assembly
24
PARTS REQUIRED:
DOOR
First, nail lower edge of panel to oor frame with 2" nails spaced 6" apart.
Angle nail to hit oor frame (Fig. B).
3
Your back wall is now standing.
FINISH
Secure back wall bottom plate to oor with 3" nails (Fig. B).
4
2
3" (7,6 cm)
x12
2" (5,1 cm)
x27
BACK WALL INSTALLATION
DOOR
3" Nails into bottom plate.
3" (7,6 cm)
Screws x2
BEGIN
Center back wall assembly on the 144" oor dimension.
Note: The 4" wall overhang is installed to the top.
1
144"
(365,8 cm)
4"
(10,2 cm)
2" (5,1 cm)
Nails
3" (7,6 cm)
Nails
Fig. B
Use GKA as a temporary brace.
Secure GKA with (2) 3" screws (Fig. A).
3" (7,6 cm)
x2
Fig. A
GKA
TEMPORARY
x1
GKA
2 x 3 x 59-1/4" (5,1 x 7,6 x 150,5 cm)