Instructions / Assembly

3/8" x 48" x 84"
(1 x 121,9 x 213,4 cm)
x1
3/8" x 42" x 96"
(1 x 106,7 x 243,8 cm)
x1
31
PARTS REQUIRED:
SIDE WALL PANELS
x1
1-1/2" (3,8 cm)
3/8" x 42" x 96"
(1 x 106,7 x 243,8 cm)
x1
3/8" x 48" x 84"
(1 x 121,9 x 213,4 cm)
x1
x2
2" (5,1 cm)
1-1/4 x 2-1/2 x 69" (3,2 x 6,3 x 175,3 cm)
x1
OO
Place 42" x 96" front panel on temporary brace OO and ush with front wall stud (Fig. B).
Secure panel with (2) 2" nails in the bottom corners (Fig. A). Angle nails to hit oor frame (Fig. C).
Center and attach OO as a temporary support. Measure down from oor 1" and mark.
Secure to oor joist using (2) 3" screws.
Push the front and/or back wall until front and side wall panels are ush along the corner (Fig. B, Fig. D).
Secure upper corner with (1) 1-1/2" nail into rafter.
3
2
1
1-1/2" Nail
1"
(2,5 cm)
BEGIN
Fig. A
42"
(106,7 cm)
1"
(2,5 cm)
Flush
Flush
3" (7,6 cm)
x2
1" (2,5 cm) 1" (2,5 cm)
TEMPORARY SUPPORT
3" Screws
LEVEL
OO Floor Joist
OO
Fig. B
Fig. C
Primed
side out
Flush at
corner
PUSH
Fig. D
2" Nails
2" (5,1 cm
Nail