Instructions / Assembly

32
PARTS REQUIRED:
SIDE WALL PANELS
x14
2" (5,1 cm)
x41
1-1/2" (3,8 cm)
1-1/2" (3,2 cm)
Nails
1-1/2" (3,2 cm)
Nails
1-1/2" (3,2 cm)
Nails
2" (5,1 cm)
Nail
2" (5,1 cm)
Nails
Fig. G
Remove temporary support OO.
Place 48" x 84" panel onto side wall ush with bottom of installed 42" x 96" panel.
Secure panel with (1) 2" nail in bottom corner (Fig. C). Ensure the measurement between the panel edges are
the same along the corner (Fig. F). Secure panel with (1) 1-1/2" nail in upper corner.
4
Primed
side out
2" Nail
Flush
Panels Flush
at bottom
5
Secure lower edge of panels to oor with 2" nails spaced 6" apart. Angle nails to hit oor frame (Fig. G).
Secure side wall panels to rafter and wall studs with 1-1/2" nails spaced 6" apart, as shown.
Repeat STEPS 1 - 5 to attach the opposite side panels.
OO
Fig. E
48"
(121,9 cm)
Fig. C
Fig. F
Same
Measurement
1-1/2" Nails
2" (5,1 cm)
Nail
6" (15,2 cm)
6" (15,2 cm)
6"
(15,2 cm)