Installation Guide

11
FINISH
LEVEL AND SQUARE FLOOR FRAME
Beforeinstallingoordecking,itisimportanttolevelandsquaretheoorframe.
Alevelandsquareoorframeisrequiredtocorrectlyconstructyourshed.
BEGIN
2
3
4
1
Uselevelandchecktheframeislevelbeforeapplyingoorpanels.
Checkforframesquarenessbymeasuringdiagonallyacrosscorners.Ifthemeasurementsarethesame,the
frameissquare.Thediagonalmeasurementwillbeapproximately153-11/16"(390,4cm).
Whentheframeislevelandsquare,secureonesideofframetothe4x4runnerswithonefasteneratendsofeach
runner. Move to the opposite end of the frame. Secure the frame to 4x4 runners with (1) fastener at ends of each
runnermakingsuretheframeremainssquare(Fig.A).
Oncetheoorframeislevelandsquarefastentheframetothe4x4runnersateachpointwheretheframe
contacts the 4x4 runners.
Seepage7forthepreferredoorlevelingmethod.
First,secure
atendswith
(1)fastener.
Second,secure
atendswith
(1)fastener.
Fig.A
153-11/16"
(390,4 cm)
153-11/16"
(390,4 cm)